Pneumatic manifold 1/2 "3-D = 15mm German type with condensation screw SET3

Item no.: RP-SP-VERTEILERSET003

EAN: 4053072078329

Manufacturer: SPIRALFLEX

Special price
€ 45,99
Net: € 38,33

including 20% VAT. , plus shipping (Paketdienst)

Previous price: € 50,93
Recommended retail price: € 66,03
Available now! Shipping time: 2 - 3 workdays
SET

    This product consists of
      • Product details
        Features
        • Easy and fast installation
        • Arbitrarily changeable and expandable
        • Professional system
        • Very good flow properties
        • Fast solubility
        • Suitability for vacuum operation
        • Ideal for compressed air and liquids
        • Can be mounted without special tools
        • Applicable with a variety of metal or plastic pipes
        • Loosen and fasten several times possible
        Installation
        • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
        • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
        • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
        • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
        • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
        Painting

        When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

        Technical Specifications

        Dimensions
        For pipe diameter (mm)
        15
        Material
        Material
        Plastic dense
        Pressure
        Working pressure (bar/psi)
        0 - 10 / 0 - 145
        Weight (kg)
        Product weight
        0.040

      • Product details
        Features
        • Easy and fast installation
        • Arbitrarily changeable and expandable
        • Professional system
        • Very good flow properties
        • Fast solubility
        • Suitability for vacuum operation
        • Ideal for compressed air and liquids
        • Can be mounted without special tools
        • Applicable with a variety of metal or plastic pipes
        • Loosen and fasten several times possible
        Installation
        • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
        • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
        • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
        • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
        • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
        Painting

        When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

        Technical Specifications

        Weight (kg)
        Product weight
        0.040

      • Product details

        Drain plug for draining condensation

        Features
        • Easy and fast installation
        • Arbitrarily changeable and expandable
        • Professional system
        • Very good flow properties
        • Fast solubility
        • Suitability for vacuum operation
        • Ideal for compressed air and liquids
        • Can be mounted without special tools
        • Applicable with a variety of metal or plastic pipes
        • Loosen and fasten several times possible
        Installation
        • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
        • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
        • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
        • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
        • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
        Painting

        When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

        Technical Specifications

        Weight (kg)
        Product weight
        0.040

      • Product details

        Air distribution box 5 x G1/2 made of aluminum for distribution of compressed air. Suitable for plastic and aluminum piping from 12 mm to 18 mm.

        Features
        • Easy and fast installation
        • Arbitrarily changeable and expandable
        • Professional system
        • Very good flow properties
        • Fast solubility
        • Suitability for vacuum operation
        • Ideal for compressed air and liquids
        • Can be mounted without special tools
        • Applicable with a variety of metal or plastic pipes
        • Loosen and fasten several times possible
        Installation
        • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
        • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
        • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
        • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
        • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
        Painting

        When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

        Technical Specifications

        Weight (kg)
        Product weight
        0.100

      • Product details
        Features
        • Easy and fast installation
        • Arbitrarily changeable and expandable
        • Professional system
        • Very good flow properties
        • Fast solubility
        • Suitability for vacuum operation
        • Ideal for compressed air and liquids
        • Can be mounted without special tools
        • Applicable with a variety of metal or plastic pipes
        • Loosen and fasten several times possible
        Installation
        • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
        • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
        • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
        • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
        • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
        Painting

        When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

        Technical Specifications

        Weight (kg)
        Product weight
        0.040

      • Product details

        Universal plug HUD-L 8x60

        Technical Specifications

        Anchoring depth standard
        Anchoring depth standard (mm)
        57
        Certifications/test reports
        Certifications/test reports
        n/a
        Color
        Color
        Red
        Dimensions
        Anchor length (mm)
        57
        Base plate through hole (mm)
        8
        Bore diameter (mm)
        8
        Dowel size (mm)
        M8
        Screw diameter range (mm)
        5 - 6
        Drill hole depth
        Drill hole depth (mm)
        80
        Environmental conditions
        Environmental conditions
        Indoor, outdoor, humid surroundings, dry surroundings
        Ground
        Ground
        (Aerated) Concrete, concrete (non-cracked), masonry (perforated stone), masonry (solid bricks), dry construction
        Head configuration
        Head configuration
        n/a
        Installation
        Type of mounting
        Through-hole mounting, pre-positioned installation
        Material composition
        Material composition
        Body: polyamide
        Material, corrosion
        Material, corrosion
        Plastic
        Weight (kg)
        Product weight
        0.010

      • Product details
        Features
        • Easy and fast installation
        • Arbitrarily changeable and expandable
        • Professional system
        • Very good flow properties
        • Fast solubility
        • Suitability for vacuum operation
        • Ideal for compressed air and liquids
        • Can be mounted without special tools
        • Applicable with a variety of metal or plastic pipes
        • Loosen and fasten several times possible
        Installation
        • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
        • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
        • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
        • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
        • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
        Painting

        When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

        Technical Specifications

        Weight (kg)
        Product weight
        0.040

      • Product details
        Features
        • Easy and fast installation
        • Arbitrarily changeable and expandable
        • Professional system
        • Very good flow properties
        • Fast solubility
        • Suitability for vacuum operation
        • Ideal for compressed air and liquids
        • Can be mounted without special tools
        • Applicable with a variety of metal or plastic pipes
        • Loosen and fasten several times possible
        Installation
        • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
        • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
        • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
        • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
        • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
        Painting

        When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

        Technical Specifications

        Weight (kg)
        Product weight
        0.040

      • Technical Specifications

        Weight (kg)
        Product weight
        0.001

    Ratings (0)

    Write your first review and help others with their purchase decision: