380V CEE plug suitable for RP-TOOLS 2-post lift, tire changer,...
Technical SpecificationsElectricsAmperage (A)32Electricity supply:Frequency (Hz)50 - 60Voltage (V)380/415Number of poles5 (3P + N + PE)Phases (Ph)3Protection classProtection classIP44Weight (kg)Product weight0.100
Special hydraulic oil with high quality raffinates as well as corrosion and oxidation protection. Specially tuned to RP-TOOLS machines.Hazard statements
H412 - Harmful to aquatic life with long lasting effects.Safety instructions
P273 - Avoid release to the environment, P501 - Dispose of according to official regulations.Shelf life
By production date 60 monthsFeatures
- ISO 11158, marking HM
- DIN 51524, part 2, marking HLP
- Denison HF2/HF0
- Eaton (Vickers)
- Cincinnati machine P-70
- RP special hydraulic systems
This oil belongs after use in a waste oil collection point. Improper disposal of waste oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited.
Technical SpecificationsWeight (kg)Product weight5
Product detailsSynthetic, universal adhesive for RP-TOOLS machines (lifts, tire changers, etc.)
This adhesive has been specially developed for RP-TOOLS machines (lifts, tire changers, etc.) to simplify machine maintenance and extend service life. Lubricate all moving parts that are exposed to high pressure loads.
The adhesive spray consists of synthetic components, is extremely strong, especially creep resistant and resistant to water, salt water, weak acids and alkalis. Lubricates and protects against corrosion even under high pressure load and temperatures from -30°C to +200°C. Contains: isobutane, n-butane, propane.Features
- Exceptionally high adhesion and thus good long-term effect
- With corrosion and wear protection additives
- Good high pressure properties
- Low friction and wear values
- Very good creeping and penetrating power
- Protects against oxidation and corrosion
- Also suitable for gears and chains (also O-ring chains)
- Prevents seizing, burning, rusting and hardening
- Water resistant
Lubrication of chains in the normal and high temperature range up to +200°C or as lubrication and corrosion protection for ropes, spindles, cylinders and other drive units. In the automotive sector, for clutch and brake linkages, joints, door hinges and hinges, struts, locks, heaters and flaps, pedals, sunroof and seat guides, bowden cables, telescopic antennas, etc. In general, the adhesive spray meets all requirements for long-term lubrication up to a working temperature of 200°C.Application
The substrate should be dry, dust-free. Old lubricant residues should be removed. Shake can vigorously (for at least two minutes) and spray on at a distance of about 20-30 cm.
Technical SpecificationsCapacityCapacity (ml)500ColorColorClear to yellowishDensityDensity0,865 kg/cm³Explosion limit aboveExplosion limit above (Vol.%)10.8Explosion limit belowExplosion limit below (Vol.%)1.4Flash pointFlash point (°C)Approx. -80Hazardous substance containsHazardous substance containsIsobutan, n-Butan, PropanHazardous substance H-phrasesHazardous substance H-phrasesH222 - Extremely flammable aerosol.
H229 - Pressurized container: may burst if heated.Hazardous substance nameHazardous substance nameLackspray AcrylHazardous substance P-phrasesHazardous substance P-phrasesP102 - Keep out of reach of children.
P210 - Keep away from heat/sparks/open flames/hot surfaces. ? No smoking.
P211 - Do not spray on an open flame or other ignition source.
P251 - Pressurized container: Do not pierce or burn, even after use.
P410 + P412 - Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF.
P501 - Dispose of contents/container according to the local / regional / national / international regulations.Hazardous substance supplierHazardous substance suppliereurOsol d.o.o.Hazardous substance symbolHazardous substance symbolGHS02
GHS07SmellSmellCharacteristicTemperatureStorage temperature (°C)-5 - +30Water solubilityWater solubilitySlightly miscibleWeight (kg)Product weight0.500