Maintenance unit FRL 40 G max. 12 bar complete with water + oiler incl. 1/4 "coupling GERMANY TYPE SET

Item no.: RP-SP-WE001

EAN: 4053072078381

Manufacturer: SPIRALFLEX

Special price
€ 60,99
Net: € 50,83

including 20% VAT. , plus shipping (Paketdienst)

Previous price: € 67,22
Recommended retail price: € 87,12
Short supply. Shipping time: 2 - 3 workdays
SET

This product consists of
    • Product details
      Features
      • Easy and fast installation
      • Arbitrarily changeable and expandable
      • Professional system
      • Very good flow properties
      • Fast solubility
      • Suitability for vacuum operation
      • Ideal for compressed air and liquids
      • Can be mounted without special tools
      • Applicable with a variety of metal or plastic pipes
      • Loosen and fasten several times possible
      Installation
      • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
      • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
      • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
      • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
      • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
      Painting

      When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

      Technical Specifications

      Weight (kg)
      Product weight
      0.300

    • Product details

      Universal plug HUD-L 8x60

      Technical Specifications

      Anchoring depth standard
      Anchoring depth standard (mm)
      57
      Certifications/test reports
      Certifications/test reports
      n/a
      Color
      Color
      Red
      Dimensions
      Anchor length (mm)
      57
      Base plate through hole (mm)
      8
      Bore diameter (mm)
      8
      Dowel size (mm)
      M8
      Screw diameter range (mm)
      5 - 6
      Drill hole depth
      Drill hole depth (mm)
      80
      Environmental conditions
      Environmental conditions
      Indoor, outdoor, humid surroundings, dry surroundings
      Ground
      Ground
      (Aerated) Concrete, concrete (non-cracked), masonry (perforated stone), masonry (solid bricks), dry construction
      Head configuration
      Head configuration
      n/a
      Installation
      Type of mounting
      Through-hole mounting, pre-positioned installation
      Material composition
      Material composition
      Body: polyamide
      Material, corrosion
      Material, corrosion
      Plastic
      Weight (kg)
      Product weight
      0.010

    • Product details
      Features
      • Easy and fast installation
      • Arbitrarily changeable and expandable
      • Professional system
      • Very good flow properties
      • Fast solubility
      • Suitability for vacuum operation
      • Ideal for compressed air and liquids
      • Can be mounted without special tools
      • Applicable with a variety of metal or plastic pipes
      • Loosen and fasten several times possible
      Installation
      • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
      • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
      • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
      • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
      • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
      Painting

      When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

      Technical Specifications

      Connection
      Connection (inch)
      1/4
      Weight (kg)
      Product weight
      0.020

    • Product details
      Features
      • Easy and fast installation
      • Arbitrarily changeable and expandable
      • Professional system
      • Very good flow properties
      • Fast solubility
      • Suitability for vacuum operation
      • Ideal for compressed air and liquids
      • Can be mounted without special tools
      • Applicable with a variety of metal or plastic pipes
      • Loosen and fasten several times possible
      Installation
      • The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
      • The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
      • At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
      • Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
      • Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.
      Painting

      When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

      Technical Specifications

      Weight (kg)
      Product weight
      0.040

    • Product details

      Universal compressed air connector for pneumatic tools with a 1/4-inch connector, suitable for almost all pneumatic tools available in Europe. Of course, also matching our offered RP-TOOLS compressed air devices. Suction devices, impact wrenches, eccentric sander. Nominal size of the appropriate plug-in couplings: 7.2

      Technical Specifications

      Weight (kg)
      Product weight
      0.050

    • Product details

      Chipboard screws 5 x 70 TX 42 incl. bit holder and 2 bits

      Technical Specifications

      Weight (kg)
      Product weight
      0.001

Ratings (0)

Write your first review and help others with their purchase decision: