A piece of push-through anchor HST M8X115/5 with nut and shim. With the concrete anchor bolts or heavy duty dowels it is possible to anchor the load safely in the concrete floor.
Technical SpecificationsWeight (kg)Product weight0.100
Product detailsSynthetic, multi-purpose adhesive lubricant for RP TOOLS equipment (lifts, tire-mounting equipment,... etc.).
This adhesive lubricant designed for RP TOOLS equipment (lifts, tire-mounting equipment,... etc.), to simplify the maintenance of the machines and to prolong the life of. Lubricate all moving parts, the high pressure loads are exposed.
The lubricant spray consists of synthetic components, is extremely strong, especially capable of creeping and resistant to water, salt water, weak acids and alkalis. Lubricates and protects against corrosion also at high pressure and temperatures of -30°C up to +200°C. Contains: propane, isobutane, n-butane.Features
- Exceptionally high adhesion and therefore good long-term effects
- With corrosion and wear protective additives
- Good pressure properties
- Low friction and wear values
- Very good creep and penetration
- Protects against oxidation and corrosion
- Also suitable for gears, and chain (O-ring chains)
- Prevents galling, seizing, fixed slats and resinification
- Water resistant
The lubricant spray can be used for the following applications. Lubrication of chains in the normal - and high-temperature range up to +200°C. As lubricating and corrosion protection for ropes, spindles, cylinders and other drive units. In the motor vehicle for clutch and brake linkage, joints, door hangers and hinges, struts, locks, heating trains and flaps, pedals, sunroof - and seat guides, Bowden cables, telescopic antennas,... etc. Generally, the lubricant spray meets all the requirements for a long term lubrication up to a working temperature of 200°C.Notes on the process
The surface should be dry, dust-free, old lubricant residues should be removed. Shake can well (at least two minutes). Spray distance of approx. 20-30 cm.
Technical SpecificationsCapacityCapacity (ml)500ColorColorClear to yellowishDensityDensity0,865 kg/cm³Explosion limit aboveExplosion limit above (Vol.%)10.8Explosion limit belowExplosion limit below (Vol.%)1.4Flash pointFlash point (°C)Approx. -80Hazardous substance containsHazardous substance containsIsobutan, n-Butan, PropanHazardous substance H-phrasesHazardous substance H-phrasesH222 - Extremely flammable aerosol.
H229 - Pressurized container: may burst if heated.Hazardous substance nameHazardous substance nameLackspray AcrylHazardous substance P-phrasesHazardous substance P-phrasesP102 - Keep out of reach of children.
P210 - Keep away from heat/sparks/open flames/hot surfaces. ? No smoking.
P211 - Do not spray on an open flame or other ignition source.
P251 - Pressurized container: Do not pierce or burn, even after use.
P410 + P412 - Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF.
P501 - Dispose of contents/container according to the local / regional / national / international regulations.Hazardous substance supplierHazardous substance suppliereurOsol d.o.o.Hazardous substance symbolHazardous substance symbolGHS02
GHS07SmellSmellCharacteristicTemperatureStorage temperature (°C)-5 to +30Water solubilityWater solubilitySlightly miscibleWeight (kg)Product weight0.500