Installation kit for scissor lift for wheel alignment inground 001 400 V

Item no.: RP-A-MP-00017

EAN: 4053072095852

Manufacturer: RP-TOOLS

Special price
€ 406,99
Net: € 339,16

including 20% VAT. , plus shipping (Paketdienst)

Previous price: € 451,99
Recommended retail price: € 587,99
Currently not in stock. Shipping time: 8 - 9 workdays
SETM1

This product consists of
    • Product details

      380V CEE plug suitable for RP-TOOLS 2-post lift, tire changer,...

      Technical Specifications

      Electrics
      Amperage (A)
      32
      Electricity supply:
      Frequency (Hz)
      50 - 60
      Voltage (V)
      380/415
      Number of poles
      5 (3P + N + PE)
      Phases (Ph)
      3
      Protection class
      Protection class
      IP44
      Weight (kg)
      Product weight
      0.100

    • Product details

      The washers are as good as always for the balancing of lifting platforms, mounting machines,... needed. Please note that stainless washers are not approved by the TÜV or the place of delivery.

      Technical Specifications

      Weight (kg)
      Product weight
      0.010

    • Product details
      Features
      • No drill hole cleaning with the new anchor rod HIT-Z for maximum application safety at the highest load level
      • Single quick-hardening injection mortar with standard HIT-V anchor rods in cracked concrete
      • Flexible anchorage depths and highest bond stresses guarantee maximum loads with the greatest economic efficiency for anchor rods HIT-V and HIT-Z
      • Wide temperature range from -10°C to +40 °C allows flexible application
      • Fast curing injection system for maximum productivity
      • Wide range of approved items - a mortar for everything
      Application
      • High performance mortar for anchorages in cracked and non-cracked concrete
      • For plug applications without drill hole cleaning with anchor rod HIT-Z in cracked concrete
      • For anchor applications with anchor rod HIT-V, internal thread sleeve HIS-N, tension anchor HZA-R and reinforcing steel BSt 500S in cracked concrete
      • For concrete-concrete-composite with shear connector HCC-K
      • Anchors in steel and metal construction (eg stairs, consoles, gates, shelves,... etc.)
      • Subsequent reinforcement connection with BSt 500S and tie rod HZA-R
      Approvals
      • ETA-08-0352 Opt.1
      • ETA-08-0202 (ETA rebar)
      • ICC ESR-2262 (AC308)
      Required number
      • RP-6253/54/13/14: 10 x anchor M16, 2 x adhesive
      • 2SHB RP-6253/54/13/14 with additional holder: 16 x M16 anchors; 3 x adhesive
      • 2SHB RP-6150B: 16 x anchor M16; 3 x adhesive; 16 x dynamics set

      Technical Specifications

      Anchor type
      Anchor type
      Chemical anchor
      Brush type
      Brush type
      Round steel bristles, HIT-RB
      Cartridge content
      Cartridge content (ml)
      330
      Certifications/test reports
      Certifications/test reports
      ETA-12/0006, ETA-11/0493, ETA-11/0492
      Cleaning method
      Cleaning method
      Manual cleaning or high-pressure cleaning
      Durability
      Durability
      12 month
      Ersatzteil
      Suitable for model number
      RP-HI-2005640 V01 (⟩2016/08)
      Expandable composite sieve sleeve
      Expandable composite sieve sleeve
      None
      Green dot mark
      Green dot mark
      Yes
      Ground
      Ground
      Concrete
      Mounting direction
      Mounting direction
      Floor, wall, ceiling
      Number of at-packed mixers
      Number of at-packed mixers
      2
      Pieces
      Pieces
      1
      Required dispenser
      Required dispenser
      MD 2000, MD 2500, ED 3500-A
      Temperature
      Storage and processing temperature range (°C)
      5 - 25
      Usable with
      Usable with
      HIT-Z, HIT-V, HIS-N, HZA-R, HCC-K
      Usage restrictions
      Usage restrictions
      Wear suitable protective gloves and goggles.
      Volume
      Volume (ml)
      330
      Weight (kg)
      Product weight
      0.300

      You may also be interested in
      Instagram
    • Product details

      The washers are as good as always for the balancing of lifting platforms, mounting machines,... needed. Please note that stainless washers are not approved by the TÜV or the place of delivery.

      Technical Specifications

      Weight (kg)
      Product weight
      0.010

    • Product details

      Special hydraulic oil with high quality raffinates as well as corrosion and oxidation protection. Specially tuned to RP-TOOLS machines.

      Hazard statements

      H412 - Harmful to aquatic life with long lasting effects.

      Safety instructions

      P273 - Avoid release to the environment, P501 - Dispose of according to official regulations.

      Shelf life

      By production date 60 months

      Features
      • ISO 11158, marking HM
      • DIN 51524, part 2, marking HLP
      • Denison HF2/HF0
      • Eaton (Vickers)
      • Cincinnati machine P-70
      • RP special hydraulic systems

      This oil belongs after use in a waste oil collection point. Improper disposal of waste oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited.

      Technical Specifications

      Weight (kg)
      Product weight
      5

    • Product details

      1 piece anchor rod M16 x 240 mm with nut and insert for use with injection mortar. With the concrete anchor bolts or heavy-duty dowels, it is possible to bond the load securely in the concrete floor with injection mortar.

      Required number
      • RP-6253/54/13/14: 10 x anchor M16, 2 x adhesive
      • RP-6253/54/13/14 with additional holder: 16 x anchor M16, 3 x adhesive

      Technical Specifications

      Dimensions
      Anchor length (mm)
      240
      Bore diameter (mm)
      18
      Mounting height max. (mm)
      123
      Standard embedment depth (mm)
      96
      Material coating
      Material coating
      Galvanized anchor rods
      Material composition
      Material composition
      Carbon steel
      Weight (kg)
      Product weight
      0.190

    • Product details

      Original RP-TOOLS pneumatic oil 1 l for compressed air service unit. This pneumatic oil is designed for the professional RP-TOOLS series.

      Features
      • Contains additives against wear, oxidation, corrosion and foaming
      • Distinguished by its desulphurising power, high viscosity index and low pour point
      • High aging resistance

      Technical Specifications

      Weight (kg)
      Product weight
      1

    • Product details

      Black, graphite-containing high-pressure grease, optimum corrosion protection through long-term lubrication

      Features
      • Extremely resilient (VKA value: 2,100N)
      • Temperature resistant from -30°C to +450°C
      • For highly loaded bearings, steel cables, cranes, elevators, escalators,... etc.
      • Salt and splash water resistant
      • Optimal adhesion
      • Prevents surface welding at high pressure

      Technical Specifications

      Weight (kg)
      Product weight
      0.490

    • Product details
      Synthetic, universal adhesive for RP-TOOLS machines (lifts, tire changers,... etc.)

      This adhesive has been specially developed for RP-TOOLS machines (lifts, tire changers, etc.) to simplify machine maintenance and extend service life. Lubricate all moving parts that are exposed to high pressure loads.

      The adhesive spray consists of synthetic components, is extremely strong, especially creep resistant and resistant to water, salt water, weak acids and alkalis. Lubricates and protects against corrosion even under high pressure load and temperatures from -30°C to +200°C. Contains: isobutane, n-butane, propane.

      Features
      • Exceptionally high adhesion and thus good long-term effect
      • With corrosion and wear protection additives
      • Good high pressure properties
      • Low friction and wear values
      • Very good creeping and penetrating power
      • Protects against oxidation and corrosion
      • Also suitable for gears and chains (also O-ring chains)
      • Prevents seizing, burning, rusting and hardening
      • Water resistant
      Application Area

      Lubrication of chains in the normal and high temperature range up to +200°C or as lubrication and corrosion protection for ropes, spindles, cylinders and other drive units.

      In the automotive sector, for clutch and brake linkages, joints, door hinges and hinges, struts, locks, heaters and flaps, pedals, sunroof and seat guides, bowden cables, telescopic antennas, etc.

      In general, the adhesive spray meets all requirements for long-term lubrication up to a working temperature of 200°C.

      Application

      The substrate should be dry, dust-free. Old lubricant residues should be removed. Shake can vigorously (for at least two minutes) and spray on at a distance of about 20-30 cm.

      Technical Specifications

      Capacity
      Capacity (ml)
      500
      Color
      Color
      Clear to yellowish
      Density
      Density
      0,865 kg/cm³
      Explosion limit above
      Explosion limit above (Vol.%)
      10.8
      Explosion limit below
      Explosion limit below (Vol.%)
      1.4
      Flash point
      Flash point (°C)
      Approx. -80
      Hazardous substance contains
      Hazardous substance contains
      Isobutan, n-Butan, Propan
      Hazardous substance H-phrases
      Hazardous substance H-phrases
      H222 - Extremely flammable aerosol.
      H229 - Pressurized container: may burst if heated.
      Hazardous substance name
      Hazardous substance name
      Lackspray Acryl
      Hazardous substance P-phrases
      Hazardous substance P-phrases
      P102 - Keep out of reach of children.
      P210 - Keep away from heat/sparks/open flames/hot surfaces. ? No smoking.
      P211 - Do not spray on an open flame or other ignition source.
      P251 - Pressurized container: Do not pierce or burn, even after use.
      P410 + P412 - Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF.
      P501 - Dispose of contents/container according to the local / regional / national / international regulations.
      Hazardous substance supplier
      Hazardous substance supplier
      eurOsol d.o.o.
      Hazardous substance symbol
      Hazardous substance symbol
      GHS02
      GHS07
      Smell
      Smell
      Characteristic
      Temperature
      Storage temperature (°C)
      -5 - +30
      Water solubility
      Water solubility
      Slightly miscible
      Weight (kg)
      Product weight
      0.500

    • Product details

      The washers are as good as always for the balancing of lifting platforms, mounting machines,... needed. Please note that stainless washers are not approved by the TÜV or the place of delivery.

      Technical Specifications

      Weight (kg)
      Product weight
      0.010

    • Product details

      The washers are as good as always for the balancing of lifting platforms, mounting machines,... needed. Please note that stainless washers are not approved by the TÜV or the place of delivery.

      Technical Specifications

      Weight (kg)
      Product weight
      0.010

    • Product details

      The washers are as good as always for the balancing of lifting platforms, mounting machines,... needed. Please note that stainless washers are not approved by the TÜV or the place of delivery.

      Technical Specifications

      Weight (kg)
      Product weight
      0.020

    • Product details

      The washers are as good as always for the balancing of lifting platforms, mounting machines,... needed. Please note that stainless washers are not approved by the TÜV or the place of delivery.

      Technical Specifications

      Weight (kg)
      Product weight
      0.020

Ratings (0)

Write your first review and help others with their purchase decision: