Installation kit for scissor lift (RP-R-8500P) 400 V

Item no.: RP-A-MP-00011

Manufacturer: RP-TOOLS

Special price
€ 245,99
Net: € 204,99

including 20% VAT. , plus shipping (Paketdienst)

Previous price: € 273,99
Recommended retail price: € 355,99
Ready for shipment in ca. 8 days Shipping time: 10 - 11 workdays
SETM1

    This product consists of
      • Product details
        400V / 380V CEE-Plug usable for RP-TOOLS 2 Post lift´s, Tire changer, ...

        Technical Specifications

        Electrics
        Amperage (A)
        32
        Electricity supply:
        Frequency (Hz)
        50 - 60
        Voltage (V)
        380/415
        Number of poles
        5 (3P + N + PE)
        Phases (Ph)
        3
        Protection class
        Protection class
        IP44
        Weight (kg)
        Product weight
        0.100

      • Technical Specifications

        Weight (kg)
        Product weight
        0.010

      • Product details

        The special viscosity of the long-term axle grease, with regular use, ensures a long service life and a problem-free operation over many years. The high-temperature long-term axle grease is a high-performance grease with exceptionally strong adhesion and offers high wear protection under extreme loads. Furthermore, it is extremely pressure-absorbent, has excellent lubricating properties and is very temperature-resistant: from -35°C to +160°C.

        Long Plex B 2 high temperature long-term axial grease is a blue dyed walk, water, corrosion and oxidation resistant EP complex soap grease. It has very good wear protection and high pressure absorption capacity. The grease is used for the lubrication of mechanical high-load rolling and plain bearings, such as wheel hubs and clutch release bearings. It can be used from truck, tractor to excavator and from quarries to the industrial workshop.

        MAN standard 284 LI H 2, high temperature grease (e.g. TGA type), CAT (caterpillar) construction equipment, and Komatsu construction equipment. The temperature range of Long Plex B 2 is -30°C to +160°C.

        Technical Specifications

        Weight (kg)
        Product weight
        0.500

      • Product details

        Special hydraulic oil with high quality raffinates as well as corrosion and oxidation protection. Specially tuned to RP-TOOLS machines.

        Hazard statements

        H412 - Harmful to aquatic life with long lasting effects.

        Safety instructions

        P273 - Avoid release to the environment, P501 - Dispose of according to official regulations.

        Shelf life

        By production date 60 months

        Features
        • ISO 11158, marking HM
        • DIN 51524, part 2, marking HLP
        • Denison HF2/HF0
        • Eaton (Vickers)
        • Cincinnati machine P-70
        • RP special hydraulic systems

        This oil belongs after use in a waste oil collection point. Improper disposal of waste oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited.

        Technical Specifications

        Weight (kg)
        Product weight
        5

      • Product details
        Features
        • No drill hole cleaning with the new anchor rod HIT-Z for maximum application safety at the highest load level
        • Single quick-hardening injection mortar with standard HIT-V anchor rods in cracked concrete
        • Flexible anchorage depths and highest bond stresses guarantee maximum loads with the greatest economic efficiency for anchor rods HIT-V and HIT-Z
        • Wide temperature range from -10°C to +40 °C allows flexible application
        • Fast curing injection system for maximum productivity
        • Wide range of approved items - a mortar for everything
        Application
        • High performance mortar for anchorages in cracked and non-cracked concrete
        • For plug applications without drill hole cleaning with anchor rod HIT-Z in cracked concrete
        • For anchor applications with anchor rod HIT-V, internal thread sleeve HIS-N, tension anchor HZA-R and reinforcing steel BSt 500S in cracked concrete
        • For concrete-concrete-composite with shear connector HCC-K
        • Anchors in steel and metal construction (eg stairs, consoles, gates, shelves,... etc.)
        • Subsequent reinforcement connection with BSt 500S and tie rod HZA-R
        Approvals
        • ETA-08-0352 Opt.1
        • ETA-08-0202 (ETA rebar)
        • ICC ESR-2262 (AC308)
        Required number
        • RP-6253/54/13/14: 10 x anchor M16, 2 x adhesive
        • 2SHB RP-6253/54/13/14 with additional holder: 16 x M16 anchors; 3 x adhesive
        • 2SHB RP-6150B: 16 x anchor M16; 3 x adhesive; 16 x dynamics set

        Technical Specifications

        Anchor type
        Anchor type
        Chemical anchor
        Brush type
        Brush type
        Round steel bristles, HIT-RB
        Cartridge content
        Cartridge content (ml)
        330
        Certifications/test reports
        Certifications/test reports
        ETA-12/0006, ETA-11/0493, ETA-11/0492
        Cleaning method
        Cleaning method
        Manual cleaning or high-pressure cleaning
        Durability
        Durability
        12 month
        Ersatzteil
        Suitable for model number
        RP-HI-2005640 V01 (〉2016/08)
        Expandable composite sieve sleeve
        Expandable composite sieve sleeve
        None
        Green dot mark
        Green dot mark
        Yes
        Ground
        Ground
        Concrete
        Mounting direction
        Mounting direction
        Floor, wall, ceiling
        Number of at-packed mixers
        Number of at-packed mixers
        2
        Pieces
        Pieces
        1
        Required dispenser
        Required dispenser
        MD 2000, MD 2500, ED 3500-A
        Temperature
        Storage and processing temperature range (°C)
        5 - 25
        Usable with
        Usable with
        HIT-Z, HIT-V, HIS-N, HZA-R, HCC-K
        Usage restrictions
        Usage restrictions
        Wear suitable protective gloves and goggles.
        Volume
        Volume (ml)
        330
        Weight (kg)
        Product weight
        0.300

        You may also be interested in
      • Product details

        Original RP-TOOLS pneumatic oil 1 l for compressed air service unit. This pneumatic oil is designed for the professional RP-TOOLS series.

        Features
        • Contains additives against wear, oxidation, corrosion and foaming
        • Distinguished by its desulphurising power, high viscosity index and low pour point
        • High aging resistance

        Technical Specifications

        Weight (kg)
        Product weight
        1

      • Product details

        1 piece anchor rod M12X240MM with nut and supplement for use with injection mortar. With concrete anchor bolts or high-performance anchors, it is possible to securely bond the load in the concrete floor with injection mortar.

        To be used with injection mortar HIT-HY 150 MAX, HIT-RE 500, HFX HIT-HY70, HIT-MM PLUS, HIT-HY 150 MAX-SD, HIT-RE 500-SD

        Technical Specifications

        Certifications/test reports
        Certifications/test reports
        ETA
        Diamond drilling approved
        Diamond drilling approved
        Yes
        Dimensions
        Anchor length (mm)
        155
        Base plate through hole (mm)
        14
        Base plate through hole punch assembly (mm)
        16
        Dowel size (mm)
        M12
        Mounting height for standard anchorage depth (mm)
        79
        Environmental conditions
        Environmental conditions
        Inside, dry environment
        Ground
        Ground
        Concrete (cracked), Concrete (non-cracked)
        Head configuration
        Head configuration
        External thread
        Installation guideline
        Installation guideline
        All
        Installation
        Type of mounting
        Through-hole mounting, pre-positioned installation
        Length identification mark
        Length identification mark
        J
        Material
        Material
        Galvanized steel
        Material composition
        Material composition
        Steel, galvanized (min. 5 µm)
        Required torque
        Required torque (Nm)
        40
        Seismic load
        Seismic load
        Yes
        Standard embedment depth
        Standard embedment depth (mm)
        60
        Usable thread length
        Usable thread length (mm)
        79
        Wrench size
        Wrench size (mm)
        19
        Weight (kg)
        Product weight
        0.100

        You may also be interested in
      • Product details

        Schwarzes, graphithaltiges Hochdruckfett, optimaler Korrosionsschutz durch Langzeitschmierung

        Eigenschaften
        • Extrem belastbar (VKA-Wert: 2.100N)
        • Temperaturbeständig von -30 °C bis +450 °C
        • Für hoch belastete Lager, Stahlseile, Kräne, Aufzüge, Rolltreppen etc.
        • Salz- und spritzwasserbeständig
        • Optimal haftend
        • Verhindert Oberflächenverschweißung bei hohem Druck

        Technical Specifications

        Weight (kg)
        Product weight
        0.490

      • Product details

        Set for filling the annular gap in mechanical and chemical dowels (carbon steel)

        Features
        • Easy handling, even with multiple attachment points
        • Through-hole mounting possible
        • Optimal load transmission through spherical disc and filling of the annular gap
        Application
        • For applications where lateral forces must be fully absorbed (gap filled with HIT-HY 200 or HIT-RE 500V3)
        • Applications with seismic or fatigue loading

        Technical Specifications

        Weight (kg)
        Product weight
        0.050

      • Technical Specifications

        Weight (kg)
        Product weight
        0.020

      • Technical Specifications

        Weight (kg)
        Product weight
        0.010

      • Technical Specifications

        Weight (kg)
        Product weight
        0.010

      • Technical Specifications

        Weight (kg)
        Product weight
        0.010

      • Product details
        Synthetic, multi-purpose adhesive lubricant for RP TOOLS equipment (lifts, tire-mounting equipment,... etc.).

        This adhesive lubricant designed for RP TOOLS equipment (lifts, tire-mounting equipment,... etc.), to simplify the maintenance of the machines and to prolong the life of. Lubricate all moving parts, the high pressure loads are exposed.

        The lubricant spray consists of synthetic components, is extremely strong, especially capable of creeping and resistant to water, salt water, weak acids and alkalis. Lubricates and protects against corrosion also at high pressure and temperatures of -30°C up to +200°C. Contains: propane, isobutane, n-butane.

        Features
        • Exceptionally high adhesion and therefore good long-term effects
        • With corrosion and wear protective additives
        • Good pressure properties
        • Low friction and wear values
        • Very good creep and penetration
        • Protects against oxidation and corrosion
        • Also suitable for gears, and chain (O-ring chains)
        • Prevents galling, seizing, fixed slats and resinification
        • Water resistant
        More information
        Areas of application

        The lubricant spray can be used for the following applications. Lubrication of chains in the normal - and high-temperature range up to +200°C. As lubricating and corrosion protection for ropes, spindles, cylinders and other drive units. In the motor vehicle for clutch and brake linkage, joints, door hangers and hinges, struts, locks, heating trains and flaps, pedals, sunroof - and seat guides, Bowden cables, telescopic antennas,... etc. Generally, the lubricant spray meets all the requirements for a long term lubrication up to a working temperature of 200°C.

        Notes on the process

        The surface should be dry, dust-free, old lubricant residues should be removed. Shake can well (at least two minutes). Spray distance of approx. 20-30 cm.

        Technical Specifications

        Capacity
        Capacity (ml)
        500
        Color
        Color
        Clear to yellowish
        Density
        Density
        0,865 kg/cm³
        Explosion limit above
        Explosion limit above (Vol.%)
        10.8
        Explosion limit below
        Explosion limit below (Vol.%)
        1.4
        Flash point
        Flash point (°C)
        Approx. -80
        Hazardous substance contains
        Hazardous substance contains
        Isobutan, n-Butan, Propan
        Hazardous substance H-phrases
        Hazardous substance H-phrases
        H222 - Extremely flammable aerosol.
        H229 - Pressurized container: may burst if heated.
        Hazardous substance name
        Hazardous substance name
        Lackspray Acryl
        Hazardous substance P-phrases
        Hazardous substance P-phrases
        P102 - Keep out of reach of children.
        P210 - Keep away from heat/sparks/open flames/hot surfaces. ? No smoking.
        P211 - Do not spray on an open flame or other ignition source.
        P251 - Pressurized container: Do not pierce or burn, even after use.
        P410 + P412 - Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF.
        P501 - Dispose of contents/container according to the local / regional / national / international regulations.
        Hazardous substance supplier
        Hazardous substance supplier
        eurOsol d.o.o.
        Hazardous substance symbol
        Hazardous substance symbol
        GHS02
        GHS07
        Smell
        Smell
        Characteristic
        Temperature
        Storage temperature (°C)
        -5 to +30
        Water solubility
        Water solubility
        Slightly miscible
        Weight (kg)
        Product weight
        0.500

      • Technical Specifications

        Weight (kg)
        Product weight
        0.020

    Ratings (0)

    Write your first review and help others with their purchase decision: