§57a starter set for car inspection Austria - up to 2.8 t

Item no.: RP-R-SET-P57A-001

Manufacturer: RP-TOOLS

Special price
€ 15.254,99
Net: € 12.712,49

including 20% VAT. , plus shipping (Speditionsversand Sperrgut)

Previous price: € 16.057,52
Recommended retail price: € 20.871,93
Currently not in stock. Shipping time: 21 - 22 workdays
SET

    This product consists of
      • Product details

        Unicycle perforator, easy to use

        The test badge is placed in a sliding stop table, the position of the individual (7) digits can be easily found by means of a lock-in aid. Each spot is perforated individually. Ideal device for small workshops, chain stores,... etc. Absolutely maintenance-free.

        Technical Specifications

        Weight (kg)
        Product weight
        1.90

      • Technical Specifications

        Brake tester
        Device:
        Brake force measuring range (kN)
        0~8000
        Braking power max. (KN)
        6.5
        Equipment:
        4WD
        Optional
        Speed ??sensor
        Yes
        Weighing function
        Optional
        equipment:
        Engine brake/drive-off aid
        No
        Brake Tester
        Equipment:
        Remote Control
        Yes
        Machine:
        Roller coefficient dry-wet
        〉 0.7 / 〉 0.6
        Testable axle load with 50% braking (kg)
        2700
        Color
        Color
        Grey
        Dimensions
        control cabinet height (mm)
        240
        control cabinet length (mm)
        600
        control cabinet width (mm)
        570
        Roll diameter (mm)
        205
        Roller cantilever (mm)
        25
        Roller set height (mm)
        240
        Roller set length (mm)
        660
        Roller set width (mm)
        2320
        Rollers length (mm)
        700
        Test width max. (mm)
        2200
        Test width min. (mm)
        800
        Electrics
        Electricity supply:
        Electrical connection
        3P+N+PE
        Frequency (Hz)
        50/60
        Fuse (electric) (A)
        3 x 25, träge
        Supply line Cross-section (mm²)
        5 x 2,5
        Voltage (V)
        400
        Motor capacity (kW/HP)
        3/4,08
        Inspection intervals - Recurring inspection and inspection obligations
        Inspection intervals - Recurring inspection and inspection obligations
        1x 2 years - routine test (Germany) / calibration with test book (Austria)
        1x day - visual inspection of plant operation
        1x year - safety check
        IT
        Software:
        Interface
        ASA assanetwork
        Material
        Material rollers
        Corundum
        Roll set
        Galvanized
        Noise
        Sound pressure level dB(A)
        < 70
        Permissible humidity
        Permissible humidity
        <90 (no condensation)
        Speed levels
        Test speed (km/h)
        5,1
        Suitable for vehicle class
        Suitable for vehicle class
        Car
        motorcycle
        Temperature
        Storage and transport temperature max. (°C)
        50
        Storage and transport temperature min. (°C)
        - 10
        Working temperature (°C)
        0 - 50
        Weight
        control cabinet (kg)
        20
        Test lane drive-over capacity max. (kg)
        4000
        Weight (kg)
        Product weight
        420

      • Product details

        Checks the condition of the brake fluid in a few seconds according to the boiling point measurement method. The check is carried out directly in the brake fluid reservoir. Delivery supplied in plastic case including pipette, separate container and DOT list according to vehicle type.

        Features
        • Suitable for brake fluid types DOT 3, DOT 4, DOT 4 Plus and DOT 5.1
        • Process controlled
        • Two-line, alphanumeric LCD-Display
        • Tester can be connected directly with the battery terminals to the car battery
        • Measuring probe made of V-steel
        Note
        • The certificate of conformity of the BMVIT Vienna / Austria is available for the test device.

        Technical Specifications

        Weight (kg)
        Product weight
        0.200

      • Product details
        Omnibus 800 light device for gasoline and diesel (for your PC/laptop)

        Omnibus 800 light for petrol and diesel with Austria approval. Operation via your existing laptop or PC, currently one of the most widely sold exhaust and multi-devices in Europe. Listed in the Nissan and Renault workshop catalog. Without fast-box OBD interface and database, as in Austria no obligation (otherwise as German device). If the device is to be used in Germany, please purchase the optional articles for Germany. Thanks to state-of-the-art measuring technology, the warm-up phase lasts only five minutes, and the legally required calibration can only be carried out once a year. Connect to laptop or PC with the USB cable.

        Equipment
        • TRO-050
        • PSI-50
        • AGS-200
        • PA-100
        • MGT-300 EVO
        Components at a glance
        TRO-050TRO-050

        Power supply including cable 240 volt for power supply exhaust gas tester

        AGS-200AGS-200

        Exhaust module for gasoline AU permanently installed in the case incl. exhaust probe, radio module for speed and temperature

        OPA-100OPA-100

        Exhaust module for diesel - AU removable incl. exhaust probe car and truck. Radio reception module for speed and temperature

        MGT 300 EVOMGT 300 EVO

        The MGT 300 BrainBee speed detector "EVO" universal speed detector for gasoline and diesel engines

        ServiceService

        As an authorized BrainBee partner, we will assist you during and after your purchase. On request, we familiarize you with the device and train you expertly. Of course, we are always available for service intervals and maintenance.

        AGS-200

        Preparation for NOx sensor. Flue gas analysis mode with infrared rays for connection to a PC serial interface. Thanks to the small dimensions and 12 volt power supply, this device is very well suited for portable use. With its own BrainBee Omnibus 800 software for installation on a PC, it performs several tests that enable the operator to fine-tune the vehicle´s emission-related systems:

        Official vehicle inspection tests and blue quality guarantee sticker test you can use the official vehicle inspection procedures with the AGS-200, which complies with the DM/628 and subsequent circulars.

        Gas value curve

        The instrument automatically stores the gas readings at different engine speeds to create a gas value curve. Especially recommended for road tests or tests on the test bench.

        Automatic diagnostics

        The program compares the gas readings and gives the operator a list of possible causes of poor engine behavior.

        Catalyst efficiency

        The program guides the operator through the test and calculates a percentage of catalyst effect for the different types of gas before and after the catalyst.

        Double lambda probe test

        With the oscilloscope function, the instrument analyzes the variations in the signal and calculates an operational efficiency value.

        Cylinder head goodness test

        The program guides the operator through the test and is able to determine whether the cylinder head gasket is leaking by analyzing the gases in the coolant expansion tank.

        Heating efficiency test

        By storing the gas values ??over a period of 30 minutes, the program can judge whether the auxiliary starting elements and the temperature elements are working correctly.

        • Measurement gas suction capacity 4 l/min
        • Automatic and continuous condensate drain (water separator additionally recommended)
        • Semi-automatic leak test
        • Automatic flow control
        • Automatic control of used O2 sensor
        • Automatic compensation of ambient pressure from 850 to 1050 mB
        • Automatic calibration (with calibration gas cylinder, customer service)
        • Automatic zero setting
        • Heat up to 20°C for 10 minutes
        • IR channels Response time
        • O2 Response time
        • Speed and temperature reception via radio or via EOBD connector (with AD 7100 accessories)
        • Oil temperature input through PT100, or via radio EOBD (with AD 7100 accessories)
        • Serial interface RS 232 connection
        • Serial interface RS 485 network
        • Voltage 11 ÷ 15 volt DC
        • Consumption 1.5 A
        • Operating temperature 5°C to 40°C
        • Dimensions 220 x 140 x 430 mm
        • Weight 5 kg
        Certification
        • Meets ISO 3930/OIML class 0
        • MID 2004/22/CE
        • DM 628/96 and subsequent circulars
        • AU 4 (Germany)
        • MOT (UK)
        • Austria
        • PCT gosstandart of Russia
        • BRML (Romania)
        • OMH (Hungary)
        • Bulgaria
        • Czech Republic
        • ARAI (India)
        • Meets the MCTCNET communication protocol
        • Including method book
        OPA-100

        Light absorption measuring module for connection to the serial port of a PC. Thanks to the small dimensions and 12 volt power supply, this device is very well suited for portable use. BrainBee´s proprietary Omnibus 800 software allows you to run multiple vehicle diagnostics and optimize maintenance operations with the OPA-100.

        Official vehicle inspection test as well as test for the blue quality guarantee sticker. With the OPA-100 compliant with regulation DM/628 and subsequent circulars you can carry out the tests of official vehicle inspection procedures.

        • Light source with green LED
        • Light receiver with photodiode
        • Automatic control of the measuring chamber pressure
        • Stabilization of the measuring chamber pressure at 90°C
        • Automatic control of glass cleaning
        • Automatic zeroing
        • Heating to 20°C - 10 minutes
        • Automatic control dirty glass
        • Speed and temperature reception via radio or via EOBD connector (with AD 7100 accessories)
        • Serial interface RS 232 connection
        • Serial interface RS 485 network
        • Power supply 11 ÷ 15 Volt DC
        • Consumption 1A DC, 5A DC with heating on
        • Operating temperature from 5°C to 40°C
        • Dimensions 200 x 140 x 430 mm
        • Weight 5 kg
        Certification
        • Meets ISO 11614
        • DM 628/96 and subsequent circulars
        • AU 4 (Germany)
        • MOT (UK)
        • Austria
        • PCT gosstandart of Russia
        • BRML (Romania)
        • OMH (Hungary)
        • Bulgaria
        • CEM (Spain)
        • Czech Republic
        • ARAI (India)
        • Meets the MCTCNET communication protocol
        • Including method book
        MGT 300 EVO

        MGT-300 EVO is BrainBee´s new universal speed recorder that transmits the recorded values ??to the receiver via Bluetooth® or USB. The speed is recorded via the ripple of the charging signal of the car battery or via the new magnetic vibration transmitter or the engine temperature via MGT-300 EVO_altezza 230 the standard temperature sensor.

        The built-in battery saves the cable connection to the car battery, which was necessary with the old speed measuring device, during the use of the magnetic vibration transmitter. The user-friendly software always provides comprehensive and clearly structured information on the signal quality, the current measured values ??and the transmission quality of the signals to the receiver. For all markets, which measure exhaust gases without OBD scantools, the speed can also be recorded via OBD interface (plug optional). The connection between MGT-300 EVO and OBD connector is also via Bluetooth.

        The MGT-300 EVO is equipped with a self-learning noise filter (neural network technology), which can independently detect the noise that occurs in a workshop or other environment in daily use and can be used to improve the measurement result.

        Connection options to PC

        The MGT 300 EVO can be connected to the PC using the supplied USB cable or Bluetooth®

        Measurement range

        Speed ??200 - 19990 RPM resolution 10, temperature 0-200°C resolution 1

        General Informations
        Upgrade options (optional)

        Universal fault diagnosis for European and Asian car manufacturers with unlimited use. Plug case, one year update included. Fast box for error inquiry and measured value representation (OBD). 2-channel digital oscilloscope with cable set for electronic and ignition signal display. Ampere pliers up to 600A communication transmission exhaust modules to PC with radio. Battery compartment for exhaust modules with charging cable and battery for completely wireless use including wireless connection to the PC.

        Data transfer to AU-Plus and via ASA network interface (optional). Fault diagnosis for cars incl. unlimited activation, one year update - plug case Europe - plug case Asia fault diagnosis heavy commercial vehicles (trucks), trailers and buses incl. unlimited activation, one year update and plug-in scope oscilloscope module DMO 810 with cable set and software connection to the schematics for direct transition device cover long (RP-TM-TRO220)

        Important!

        For the AU (exhaust emission test) in Germany, a digital read-out device such as BrainBee F-Box, F-Box II and F-Touch must also be purchased for later transfer to the legal database.

        Technical Specifications

        Color
        Color
        Black / silver
        Electrics
        Electricity supply:
        Frequency (Hz)
        50
        Voltage (V)
        230
        Exhaust emissions testing
        Exhaust emissions testing
        Diesel and petrol
        Maintenance interval customer
        Maintenance interval customer
        As required
        Maintenance interval RP-TOOLS
        Maintenance interval RP-TOOLS
        Once a year
        Weight (kg)
        Product weight
        70

        You may also be interested in
      • Product details

        Mechanical headlamp leveler, wheeled chassis, mirror, visor and plastic centering ring. Fixed plate and adjustable plate. For precise and fast adjustment of all types of headlamps. Suitable for cars, trucks and buses.

        Features
        • Mirror optics for precise alignment of the device
        • Mirror visor
        • Digital luxmeter
        • Frese lens
        • Inclined position
        • Pillar 166 cm

        Technical Specifications

        Weight (kg)
        Product weight
        35

    Ratings (0)

    Write your first review and help others with their purchase decision: